4810 Briar Road
Cleveland, Ohio 44135
Phone: 216-265-0400
Toll Free: 800-362-6881

Chevalier FSG-1224ADIII Automatic Surface Grinder


High-Precision 3-Axes Automatic Surface Grinder

The FSG-ADIII series features a new user-friendly touch-screen control with standard surface grinding programs and a plunge grinding cycle. There is also an optional crisscross or zigzag and a CBN dressing cycle. So simple and user-friendly, all skill levels can operate this series of ADIII controllers.

The fully automatic grinding mode consists of rough- and fine-grinding cycles, switching from rough-grinding down-feed increments to fine-grinding down-feed increments at preset points during the cycle. This cross-feed also switches from a rough to fine cross-feed increment, which results in a finer surface finish and finer accuracy.

  • No more cycle stops or prepping the wheel
  • Faster cycle times
  • Chevalier control: touch screen
  • 3-Axes Fully Automatic
  • Table size: up to 16"W x 40"L
  • Auto. dressing and compensation optional
  • Elevation is driven by servo motor
  • 3-Axes needle roller way
  • Max. grinding sizes: up to 16" x 40"
  • Spindle power: up to 10 HP, greater spindle HP available


  • Table Size: 11 3/4" x 23 5/8"              
  • Max Grinding Length Longitudinal: 24"        
  • Max Grinding Width Crosswise: 12"        
  • Max Distance from Table Surface to Spindle Centerline: 24"        
  • Longitudinal Movement of Table: 25 5/8" 
  • Maximum Travel, Manual: 27 1/2" 
  • Table Speed, infinitely variable: 5~25 m/min.     
  • Rapid travel, approx.: 3.5m/min.          
  • Automatic Transverse Increment: 2.9m/min.          
  • Maximum Automatic Travel: 12"        
  • Maximum Manual Travel: 13 3/4" 
  • Handwheel per revolution: 0.25"     
  • Handwheel per graduation: 0.0025"
  • Microfeed per revolution: 0.005"  
  • Microfeed per graduation: 0.00005"              
  • Wheelhead Vertical Infeed: Automatic Infeed: 0.000050"-0.002"             
  • Rapid Travel, approx: 25ipm   
  • Grinding Spindle Drive Speed: 60Hz1750rpm; 50Hz1450rpm      
  • Power rating: 5HP/4P

For additional information - http://www.chevalierusa.com/products/grinding/automatic/fsg1224-1632-1640adlll-detail

All Rights Reserved 2023, Numerequip, Inc. - Admin Login   |   Alt Media Studios